Nilfisk-ALTO SCRUBTEC 343E User Manual download pdf (Page 56)

18 SCRUBTEC 343E 909 6315 000(4)2009-11 A

ENGLISH USER MANUAL

TROUBLESHOOTING

Trouble Possible Cause Remedy

The motors do not turn on

The power supply cable (21) is faulty or

disconnected from the electrical mains

Replace or connect the cable

The dirty water vacuuming is insufﬁ cient

The recovery water tank (26) is full Empty

The vacuum grid (36) is clogged or the ﬂ oat

is closing

Clean the grid and check the ﬂ oat

The vacuum hose (22) is disconnected from

the squeegee (11) or it is damaged

Connect

The squeegee (11) is dirty, or the squeegee

blades (13, 14) are worn or damaged

Clean the squeegee or replace the blades

The recovery water tank cover (6) is not

properly closed, or the gasket (32) is

damaged

Check and/or clean the seating surface or

replace the gasket

The recovery water tank (6) is dirty (clogged

drain hole)

Clean

The solution ﬂ ow is insufﬁ cient The solution ﬁ lter (20) is dirty Clean

The squeegee leaves marks on the ﬂ oor

There is debris under the squeegee blades

(13, 14).

Remove the debris

The squeegee blades (13, 14) are worn,

chipped or torn

Replace the blades

For further information refer to the Service Manual, available at any Nilﬁ sk Alto Service Center.

SCRAPPING

Have the machine scrapped by a qualiﬁ ed scrapper.

Before scrapping the machine, remove and separate the following materials, which must be disposed of properly according to the

Law in force:

Brush –

Pad –

Electrical and electronic components (*) –

Refer to the nearest Nilﬁ sk Alto Center especially when scrapping electrical and electronic components.(*)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 75 76

Comments to this Manuals

No comments

Nilfisk-ALTO SCRUBTEC 343E User Manual Page 56

Comments to this Manuals

Related products and manuals for Scrubber Nilfisk-ALTO SCRUBTEC 343E