Nilfisk-ALTO SSE 350 User Manual download pdf (Page 7)

7

SSE 350

1 Safety Notes

WARNING! Read these safety

notes and the operating

instructions before putting

this machine into operation.

This machine may only be

employed for its intended use, as

described in the operating

instructions. All covers, flaps and

caps must be installed and closed

in the proper manner. The

machine may only be operated

by persons who have been

instructed in its handling and

expressly entrusted with its

operation.

This machine must not be

operated with inflammable

liquids, health-endangering

substances and/or inflammable

dusts.

Remove the plug of the mains

lead from the plug socket before

carrying out cleaning and

maintenance work.

1 Dirty water tank

2 Fresh water tank

3 Suction nozzle lock

4 Suction nozzles

5 Power cable

6 Suction hoses

7 Quick-change coupling for

hand tool

8 Suction hose for fresh water

9 Sealing plug

A Two-position switch for

suction unit

B Three-position switch for

brush roller and spraying

pump

C Hand switch for cleaning

agent pump

Do not pull the machine along

with the mains lead and do not

drive over the lead. Take care

not to crush the mains lead or to

drag it over sharp corners. If the

mains lead is damaged, the

machine must not be used until

the lead has been replaced with

an approved lead. Observe the

protection class and type of

protection.

Repairs and maintenance work

may only be carried out by a

person authorised by Alto or by an

acknowledged organisation.

If used for trade purposes the

cleaner must be subjected to a

regular safety check, normally

once per year. Observe the

applicable national regulations!

This machine is suitable for

commercial operation under

heavy-duty conditions, such as in

hotels, schools, hospitals,

factories, shops, rental

apartments and all other

applications which do not

constitute normal household

cleaning jobs.

Other persons or children must

not be in the working area during

operation.

When using cleaning fluids, a

hazard can suddenly arise if

these fluids are hot, under high

pressure or if the fluids

themselves represent a health

hazard. Use only the cleaning

agents approved by Alto.

If either fluid or foam escapes

unintentionally from the

machine, switch off the machine

immediately and observe the

notes given in the operating

instructions.

Check the filling levels at regular

intervals and clean the tank as

described in the operating

instructions.

If attachments or accessories are

used, the safety notes and

operating instructions for this

equipment must also be

observed. Do not overload the

attachment plug sockets on the

machine by connecting

equipment with a rating higher

than the rating of the socket. Use

brushes, pads and accessories

only as described in the operating

instructions. Failure to observe

these instructions can lead to a

hazardous situation arising.

This machine may only be

operated on a maximum gradient

of 2% unless steeper gradients

are approved in the operating

instructions.

Move the machine carefully on

ramps and slopes. Do not change

direction on slopes. Do not park

the machine on slopes. When

leaving the machine, remove the

key and secure the machine to

prevent unauthorised operation.

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments